Power Generation Filtration Solutions
Model 4B Gravity Oiler
4B Gravity Oiler
|
Description The Gravity Sight Feed Oiler affords a clear view and fine control of oil flowing by gravity, to a lubrication point. (P/N 24N55) Applications Paper Mill Machine Oiling Systems Features
|
|
Installation The Model 4B Oiler must be installed in a vertical position. To facilitate service and prevent possible starvation of lubricant to a bearing, no more than four oilers should be manifolded together. Operation Start the flow of oil through the system. Turn the oiler adjusting screw to open the oiler. Adjust the screw until the described flow is obtained. Maintenance This oiler should give trouble-free service with little or no maintenance required. It may be desirable to clean windows periodically. To do so, close the adjusting screw to stop the flow through the oiler. Insert a pointed tool into the hole in the body (See X in figure below) to push the O-ring away from the body. By pulling the loop thus formed, the O-ring may be easily withdrawn from the body. To facilitate the removal of the glass window, touch a piece of adhesive tape to the glass and pull gently. Clean glass with a soft cloth. Inspect O-ring and replace if worn or damaged. |
Start the flow of oil through the system. Turn the oiler adjusting screw to open the oiler. Adjust the screw until the described flow is obtained. |
Mid-States Engineering & Sales, Inc.
5001 Chase Ave., Downers Grove, IL 60515
Hours: 8:00am - 4:30pm CT
Tel: (630) 969-2958 Fax: (630) 969-4272
Copyright © 2008. All rights reserved.
www.mid-states-sales.com
Power Generation Filtration Solutions
|
Filtration
|
Pumps
|
Flow Indicators
Gauges-Thermometers
|
Environmental
|
Liquid Handling
|
Meters
New Products |
About Mid-State |
Contact Us |
Home
Secondary Containment |
Filters |
Flow Indicators |
Gauges & Thermometers |
Indicators
Other Resources
Internet Marketing -
Chicago Web Design
by PrairieWeb
