ABAQUE PERISTALTIC HOSE PUMP

Peristaltic (Hose) pump

NO PUMP WITH CONFIDENCE

The Blackmer Abaque Series pump can handle your toughest pumping needs - from abrasive and aggressive fluids to sheer sensitive and viscous materials.

SEAL FREE

Seal free design eliminates leaks and contamination. Fluids are contained within the hose. The hose is the primary maintenance component.

RELIABLE

The Blackmer Abaque Series pump is self-priming to 25.5 ft. (9 meters) manometric lift. This pump is able to run dry continously without detrimental effects. The pump is capable of running in forward or reverse.

DURABLE

Ductible iron and steel construction allow higher discharge pressures to 232 psi. (16 bar). Its solid construction and advanced design also reduce maintenance and repairs.

OPERATION PRINCIPLE

Pumping action is achieved by compression of a circular loop of elastomeric hose with two diametrically opposed rotating shoes. This rotational motion forces the fluid in the hose to move ahead of each shoe. When each shoes reaches the end of the loop, the reinforced tube immediately returns to its original shape, thereby ensuring suction and priming. The pump housing is partially filled with lubricant, aiding smooth running of the shoes on the hose. The inside of the hose and hose inserts are the only pieces of equipment in contact with pumped fluids, allowing aggressive and contaminated fluids to be pumped.

APPLICATIONS

Chemical process industry
Food industry
Industrial and municipal water treatment
Paints and coatings
Ceramics
Mining
Filter press equipment

HOSES

The following hoses are available for use in the Abaque Series pump:

Natural rubber: Highly resilient with excellent abrasion resistance and strength. Generally resistant to diluted acids and alcohols.
Buna (NBR): Highly wear resistant to oily products.
EPDM: High chemical resistance, especially with concentrated acids, alcohols and ketones.

FEATURES AND BENEFITS (summary)

Available in 10 different sizes that provide flow rates of .07 to 290 gpm (15 to 66,000 L/h).
Will handle abrasive fluids with little wear since only the hose and hose inserts are in contact with the material being pumped.
Since only the inside of the hose and hose inserts are in contact with the pumpage, aggressive and contaminated fluids can be processed without the devastating damage experienced by other pumping technologies.
Hoses are constructed of natural rubber, Buna, or EPDM within the pump's casing, provide high levels of volumetric accuracy for sampling, transfer, and metering applications.
Ability to pass solids in the material being pumped.
Dry-run capability allows tank and line stripping.
Seal-less design eliminates leaks, contamination and wear problems associated with difficult to seal products.
Self-priming up to 29.5 feet (9 meters).
Reversible operation allows pumping in both directions.
Durable construction of ductile iron and steel construction allow higher discharge pressures up to 217 psi (15 bar).
Low maintenance requirements of the hose and shoes.

OPTIONS

The Abaque Series pump is available in 10 different models, ranging from flow rates of 0.07 to 339 gal US/min (15 to 77000 l/h). Choose close-coupled or bare shaft models.

Also available:

Leak detector
Vacuum kit
Non-metallic inserts (PPH, PVDF)

Mid-States Engineering & Sales, Inc.
5001 Chase Ave., Downers Grove, IL 60515
Hours: 8:00am - 4:30pm CT
Tel: (630) 969-2958 Fax: (630) 969-4272
Copyright © 2008. All rights reserved.
www.mid-states-sales.com

Power Generation Filtration Solutions | Filtration | Pumps | Flow Indicators
Gauges-Thermometers | Environmental | Liquid Handling | Meters

New Products | About Mid-State | Contact Us | Home

Secondary Containment | Filters | Flow Indicators | Gauges & Thermometers | Indicators

Other Resources

ABAQUE PERISTALTIC HOSE PUMP

Peristaltic (Hose) pump

Internet Marketing - Chicago Web Design by PrairieWeb