CAMEL® SYSTEMS

Secondary Containment

The CAMEL® is a modular system that contains incidental spills that occur during tank truck transfer operations. Due to the strength and flexibility of the fiberglass composite materials, the CAMEL® may be installed on a variety of solid substrates and applications. The CAMEL® may be used wherever hazardous liquids are transferred by tank truck.

Each CAMEL® system is manufactured from heavy-duty, 1" thick, fiberglass composite materials.

The CAMEL® system is shipped as a series of 20' long pans, which have slip fit jointures. This flexible design means that a system of variable length (generally 40' to 100' long) can be easily installed by simply increasing the number of pans.

Installation is fast and easy:

One half of the sections are joined end-to-end via a slip fit method to create one-half of the CAMEL system.
The two mirror image halves are positioned side-by-side and joined together with heavyduty nuts and bolts.
Steel ramp set(s) (one end for back in, both ends for drive through) is (are) sited and the system is secured to the substrate via steel hold-downs.

Custom Camel® sizes and capacities

Note that sectional joints and the center wall joint are sealed with neoprene gasket, silicone, or fiberglass bonding.

Because a customer occasionally requires a system that either has a minimal ramp incline, or has a higher wall, we developed the GATE MODEL CAMEL System.

While the GATE MODEL is manufactured from the same fiberglass composite materials and is, in general the same style of system, there are several differences.

The walls are 9" high.
The GATE MODEL CAMEL® is shipped as a series of 20' long x 10' wide pans.
A single set of pans is slip fit end-to-end to create a completed system.
Entry and exit is over a low ramp and a gate must be removed and replaced during system use.

Because the CAMEL® is heavy-duty with a long life, sets up quickly, and is portable, it is a fast, cost-effective way to meet government regulations for truck spill containment.

CAMEL® systems are often custom designed to meet special requirements. Special filter drain systems, are available to pull out hydro-carbons while allowing removal of rainwater from the CAMEL® system.

KEY CAMEL BENEFITS VERSUS ALTERNATIVES:

No excavation or footers required
May be used on any solid substrate
Fast, clean installation by coustomer or our technicians.
Portability
Superior corrosion resistance-even to high acid concentrations
Flexibility in cold or hot weather or moist environments
No cracking
Custom design services available

Mid-States Engineering & Sales, Inc.
5001 Chase Ave., Downers Grove, IL 60515
Hours: 8:00am - 4:30pm CT
Tel: (630) 969-2958 Fax: (630) 969-4272
Copyright © 2008. All rights reserved.
www.mid-states-sales.com

Power Generation Filtration Solutions | Filtration | Pumps | Flow Indicators
Gauges-Thermometers | Environmental | Liquid Handling | Meters

New Products | About Mid-State | Contact Us | Home

Secondary Containment | Filters | Flow Indicators | Gauges & Thermometers | Indicators

Other Resources

CAMEL® SYSTEMS

Secondary Containment

Internet Marketing - Chicago Web Design by PrairieWeb