Kaydon KL1 Dedicated Coalescing System with Automatic Water Drain and Totalizing Water Meter

Filtration Systems For FD-PA-ID Fan Reservoirs

KL1 (1 GPM) TURBO-TOC®

The Model KL1 Turbo-Toc® is a 1 GPM, Kidney Loop, Pressure Coalescence Turbine Oil Conditioner that continuously pumps oil from the main turbine reservoir, cleans and dries the turbine oil, and returns the turbine oil, under pressure, to the reservoir. It is designed for continuous, 24/7, operation and is engineered with continuous operation rated components. The KL1 is capable of maintaining "Reservoir Cleanliness" on a reservoir sized up to 120 gallons. This unit is ideal for Forced Draft (FD), Primary Air (PA), Induced Draft Fans (ID), for oils up to ISO 68 in Viscosity.

The Turbo-Toc® is a self-contained, skid mounted, micro-processor controlled, full status control panel, pressure coalescence system that features an automatic water drain and a totalizing water meter to help your power plant monitor water removal and/or predict critical maintenance.

FORMULA FOR PROVIDING CLEAN/DRY TURBINE OIL 24 HOURS PER DAY

Solid contamination and water removal in one very compact design (21"L x 13"W x 30"H).
1 gpm continuous process rate for fast reservoir turnover and generous reserve for emergencies.
Suitable for reservoir capacities to 120 gallons.
Extremely compact design mounts directly on or adjacent to reservoir, less than 99 pounds dry.
Removal of particulate smaller than bearing clearances with absolute rated filter elements¹.
80% single pass water removal.
Low maintenance, operator not required.
Very low operating cost.
Simple installation.

Kaydon KL1 Dedicated Coalescing System with Automatic Water Drain and Totalizing Water Meter

MODEL KL1H (1 GPM) Removes free and emulsified water and solid contamination from small turbine and lube oil reservoirs, 1 gpm continuous process rate for permanent off-line installation.

1 = 2.8 micron absolute rated filters test per ISO 4572.
2 = Influent 5000 ppm water, 200 ssu maximum turbine oil.

THE BENEFITS OF CLEAN/DRY LUBE OIL:

Improve Reliability & Availability of Turbine
Reduce Bearing & Seal Failures
Fewer Forced Outages
Extend Planned Outages
Reduce Oil Disposal

APPLICATIONS:

Industrial Steam Turbines
Forced Draft Fan Turbines
Induced Draft Fan Turbines
Primary Air Fan Turbines
Boiler Feed Pump Turbines
Compressor Turbines
High Speed Gearboxes
Mechanical Drives
Fluid Drives
Any Small Turbine Oil Reservoir

OPERATING PARAMETERS:

Permanent Installation
1 GPM Continuous Process Rate
Reservoir Capacities to 300 Gallons
Standard Oil, Mineral Based Turbine, ISO 68 Maximum
Non-Standard Oils Require Manufacture's Approval
Standard Voltage, 110 VAC

ORDER CODE

Model KL1-AA-WM-S
AA=automatic air release (releases any trapped air in system automatically)
WM=water meter (totalizes amount of water removed by KL1 TURBO-TOC®)
S=sample kit (this kit helps take samples of oil for analysis)

Mid-States Engineering & Sales, Inc.
5001 Chase Ave., Downers Grove, IL 60515
Hours: 8:00am - 4:30pm CT
Tel: (630) 969-2958 Fax: (630) 969-4272
Copyright © 2008. All rights reserved.
www.mid-states-sales.com

Power Generation Filtration Solutions | Filtration | Pumps | Flow Indicators
Gauges-Thermometers | Environmental | Liquid Handling | Meters

New Products | About Mid-State | Contact Us | Home

Secondary Containment | Filters | Flow Indicators | Gauges & Thermometers | Indicators

Other Resources

Kaydon KL1 Dedicated Coalescing System with Automatic Water Drain and Totalizing Water Meter

Filtration Systems For FD-PA-ID Fan Reservoirs

Internet Marketing - Chicago Web Design by PrairieWeb